Often FRITZ!Box, Speedports and other wireless routers do not have the radio range, which is needed.The solution to such a problem is an external antenna for your router. Unfortunately many AVM FRITZ!Boxes and Speedports do not have a connector for an external antenna. One solution to this problem is an antenna with a housing clip and an IPEX plug.
The conversion of these devices is usually very simple and takes only a few minutes. For this, you must carefully open the wireless router, loosely disconnect the original antenna connector from the board, connect the IPEX plug of the new antenna to the socket on the board, attach the antenna to the cover and then close the housing again carefully.
With this conversion kit, you can improve both the transmitting and receiving characteristics of your device. The advantages for you are, among other things, higher signal strength, higher range, higher transmission rates and fewer disconnections.
This conversion kit with two 7dBi omni antennas is especially well suited for WiFi networks in private households.